The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The control stick (083) yoke and torque tube. The previous plug fit inside of the yoke (painted green) and the torque tube was connect to it. the output of the torque tube was directed to the mixer assembly throught other direct tubes and cables. The mixer was located in the upper REFER compartment - behind the cockpit.

MArv

The 083 (Control stick ) wire harness and connector plug. The control stick (083) was screwed into this connector. the rest of the control stick yoke and torque tube is shown in another picture.

MArv

The 083 (Control stick ) wire harness and connector plug. The control stick (083) was screwed into this connector. the rest of the control stick yoke and torque tube is shown in another picture.

MArv