769.jpg 2011 - 590164Thumbnails2006 5901642011 - 590164Thumbnails2006 590164
59-0164 nose section, Oct 06, in storage at the Southern Utah Air Museum in Washington UT. (photos from E-Bay)
Facebook
Information
Rating score
no rate
Rate this photo
Visits
2064
Dimensions
400*299
File
769.jpg
Filesize
21 KB
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Steve Templeman - Monday 20 February 2012 17:52
Worked on this one many times in the late '70's and early '80's at Tyndall. 27 years later I could take two strangers out with me and reinstall the radome (nose cone). All we need is a 3/8" socket and a ratchet with an extension......And a torque wrench....Was it 235 in/lbs? Don't forget to reconnect the pitot heat plug and safety wire it.
Powered by Piwigo
© F-106DeltaDart.com Founded 1998. All Rights Reserved